Hello Guys!I want to share How to Flash new firmware on your Huawei Y600-U351.Do this if your Huawei Android Phone have problem like this hang in logo,phone freezes,rebooting and no power but only work if your phone detected by PC.
But first thing first,Before doing this make sure you charge your battery atleast 60% up and also make a hard reset first,because sometimes performing a hard reset will fix this kind of problem mention above...
This is How to Do a Hard Reset in your Huawei Y600-U351
1.Power Off Phone
2.Hold and Press Volume UP to go to Android System Recovery
3.Use Volume Down to select wipe data/factory reset
4.Use Volume up to confirm the selection
5.Now select yes-delete all user data,again confirm by pressing Volume up
6.After Complete wiped,Reboot System to finally wipe your Phone
Now,if this solution won't work on your phone,Flashing new firmware will probably work.First,you must download below file to do this..
The File can be Download Here>http://consumer.huawei.com/ar/support/downloads/detail/index.htm?id=42945
All you need is in this file,so download it!
After Downloading this,Extract it using extractor software in your desktop screen to easily navigation.
How To Flash New Firmware in your Huawei Y600-U351.
1.Open folder Y600-U351V100R001C332B006>Software>upgrade tools& drivers>SP_Flash_Tool_v5.1352.01
2.Open Flash Tool
3.Click Scatter loading and browse for MT6572_Android_scatter(USB upgrade>Y600-U351V100R001C332B006_DCC)
4.Click Download (See image)
5.Now connect your phone (Must be Off) and wait if flashing is completed
6.Power your Phone (If powered and your are in activation window,conrats your phone has been flash to the new firmware.)
Note:You must installed the drivers of your phone to detect in your Pc.You find this in the file that you downloaded above...
Any questions???Use the Comment System!
But first thing first,Before doing this make sure you charge your battery atleast 60% up and also make a hard reset first,because sometimes performing a hard reset will fix this kind of problem mention above...
This is How to Do a Hard Reset in your Huawei Y600-U351
1.Power Off Phone
2.Hold and Press Volume UP to go to Android System Recovery
3.Use Volume Down to select wipe data/factory reset
4.Use Volume up to confirm the selection
5.Now select yes-delete all user data,again confirm by pressing Volume up
6.After Complete wiped,Reboot System to finally wipe your Phone
Now,if this solution won't work on your phone,Flashing new firmware will probably work.First,you must download below file to do this..
The File can be Download Here>http://consumer.huawei.com/ar/support/downloads/detail/index.htm?id=42945
All you need is in this file,so download it!
After Downloading this,Extract it using extractor software in your desktop screen to easily navigation.
How To Flash New Firmware in your Huawei Y600-U351.
1.Open folder Y600-U351V100R001C332B006>Software>upgrade tools& drivers>SP_Flash_Tool_v5.1352.01
2.Open Flash Tool
3.Click Scatter loading and browse for MT6572_Android_scatter(USB upgrade>Y600-U351V100R001C332B006_DCC)
4.Click Download (See image)
5.Now connect your phone (Must be Off) and wait if flashing is completed
6.Power your Phone (If powered and your are in activation window,conrats your phone has been flash to the new firmware.)
Note:You must installed the drivers of your phone to detect in your Pc.You find this in the file that you downloaded above...
Any questions???Use the Comment System!
Comments
Post a Comment