O + Ultra Lite Android 5.1 Firmware Download

Here's the firmware of O Plus Ultra Lite Android 5.1 which you can use to flash the firmware using CM2 software and the free software Research Download.

First thing first,I would to share the specifications of this smartphone from O +.

POWERED WITH ANDROID LOLLIPOP
5” HD SCREEN | 8MP AF BACK CAMERA WITH FLASH
2MP AF FRONT CAMERA

Product Features

Color: Bronze Gray Factors: 16GB Internal Memory 2GB RAM Experience Android 5.1 Lollipop 5" IPS Screen Quad Core 1.3GHz Processor Dual Camera 8MP AF Back Camera with Flash + 2MP Front Camera 3G Wi-Fi Connectivity FB, push email anytime, anywhere Bluetooth Connectivity Expandable Memory up to 32GB Dual MicroSIM Connect: 3G Wi-Fi GSM 850/900/1800/1900 WCDMA 850/1900/2100 Dual MicroSIM Bluetooth GPRS/EDGE, HSPA Look: 5" IPS Capacitive Screen 144.5 x 72.5 x 8.8" mm

Capture: 8MP Back Camera w/ Flash 2MP Front Camera Selfie Fix/Single Shot/ Continuous Shot/ Smile/ Time/Stamp/EIS/Autofocus Watch: MP4, AVI, 3GP Innovate: PowerPlus Air Shuffle Doodle Control Messages: SMS MMS Push Email IM Listen: Plays MP3 FM Radio Inbox: 3000mAh Battery Micro USB Cable Charger Adapter Earphones FREE 16GB SanDisk Memory Card

How To Use SPD Upgrade Tool

1.Download the SPD_Upgrade_Tool_R4.0.0001 latest version,Then extract to your desired location.(Already in the firmware which you can download below my post).

2.Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.

    *NOTE: UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the            name of the lower version but they are both SPD Upgrade tool.

3.In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open

4.Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea

5.Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.

6.Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.

7.After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset.

If any questions?Use the comment system below!

Thanks for dropping by!

Download:
O Plus Ultra Lite Android 5.1 Firmware