In this post,I will guide you on How to Flash Firmware using ODIN on Any Samsung device!You can do this steps if your Samsung Android Phone stuck on Android Logo or Samsung Logo...
Disclaimer :
This guide for educational purpose only, I am not responsible if your device increasingly problematic after following this tutorial. (Do With Your Own Risk )
How to installation firmware using ODIN on Any Samsung device
Download all files of below :
Download Your Original Stock Firmware ↦ usually, consists of a PDA, AP, Modem, Phone, CP, BL, Bootloader, and CSC file depends on the type of your samsung.Note:You must have a account to that site in order to download any files!
Download Samsung USB Driver.zip ↦ Usb driver for all Samsung device, if you already installed KIES on your computer than this download can be ignore.
Download Odin3 Latest version the Samsung Android Flashing tools↦ this is a latest version of Odin3 tool flasher for update firmware your Samsung devices
Starting installation process :
Install Samsung USB Driver on your computer and make sure it completely work.
Run Odin3.exe, and leave it open on your desktop.
Now turn off your device, after completely turn off press and hold Volume Down + Home + Power button until you can see Warning Sign. see simulations below….
On Download Mode windows press Volume Up and then connect your device to computer.
Next, check the “Auto Reboot” and “F. Reset Time” options in Odin Tool. Note : DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
If your ROM is a single .tar.md5 package click on the AP/PDA button and browse to the .tar or .tar.md5file that you extracted in step 1 and select it.
BL = Bootloader
AP = PDA (CODE)
CP = PHONE (MODEM)
CSC = CSC
Comments
Post a Comment