Here's the Tested Firmware of X5 PRO which you can use to fix this kind of problem you may encounter in your X5 PRO Android Phone like hang in logo,force close,unfortunately stops and boot loop also and even viruses like monkey virus..
Use SP_Flash_Tool_exe_Windows_v5.1452.00.000 to flash this firmware.Just follow the instructions below.
VCom Drivers
Drivers Auto Installer
Sp Flash Tools
Sp Flash Tools
After finish downloading all files put in one folder in desktop to easily navigate the files.
Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
Install the driver if not already installed
Download and extract your ROM package and find the scatter.txt file.
Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear.
After the red progress bar is complete, there will appear a purple progress bar.
Right after the purple progress bar is complete, a message will appear underneath it:
“Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
You can now safely disconnect your phone and turn it on. The process ends here.
Use SP_Flash_Tool_exe_Windows_v5.1452.00.000 to flash this firmware.Just follow the instructions below.
Pre-requisites:
X5 PRO FirmwareVCom Drivers
Drivers Auto Installer
Sp Flash Tools
Sp Flash Tools
After finish downloading all files put in one folder in desktop to easily navigate the files.
Tutorial Upgrade:
Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
Install the driver if not already installed
Download and extract your ROM package and find the scatter.txt file.
Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear.
After the red progress bar is complete, there will appear a purple progress bar.
Right after the purple progress bar is complete, a message will appear underneath it:
“Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
You can now safely disconnect your phone and turn it on. The process ends here.
Comments
Post a Comment