How To Remove FRP Lock on Samsung J1 2016 (SM-J120H)

Below is the Instruction you should do to remove FRP lock on your Samsung J1  (SM-J120H).

Pre-Requisites:

Odin
SM-J120h frp reset

After Downloading above files,Extract it in your Desktop

Now,Put Phone Download Mode

• Turn off the device     
• Press and hold Volume Down key + Home Key, while pressing these keys then press and hold Power key for a while     
• Release all key when you see ODIN Mode / Download Mode
• When connected successfully, you will get a message in Odin saying Added!!. (In case you don’t get it, try another USB port. If that doesn’t help either, then re-install USB drivers).

In Odin make sure that the Auto Reboot and F. Reset Time check boxes are the only options checked and nothing else is.

Click on PDA on Odin, locate the sm_j120h_convert_to_j120f_frp_reset_by_renz.tar.md5 file and hit the Start button to initiate the update process.

When flashing update installation is successfully completed, on Odin ID:COM will turn green and Odin will show you a PASS message.

After finish flashing on ODIN,Open Z3X Samsung ToolPRO v25.7

Select [J120F]

Put Again In DOWNLOAD MODE

Connect your Phone to PC

Press Reset FRP/React/EE and wait until Done

Follow on Phone screen to continue using phone....

All the Credits goes to Renz Altajeros for the FRP file!!!