Here's the Firmware of Lenovo A5000 which you can use to flash using SP Flash Tool to fix the following software problem you may encounter in your Lenovo A5000,Like Force Close,Hangs,Unfortunately Error and Hang in Logo.
Warning:Make sure your battery is fully charged atleast 70% above before proceed to perform this method.
Prerequisites:
Lenovo A5000 Firmware
SP_Flash_Tool_exe_windows_v5
Mediatek USB VCOM drivers
PC
USB Cable
Procedure:
1.Download and extract the SP Flash Tool and Mediatek USB VCOM drivers.Install the driver if not already installed
2.Download and extract your ROM package and find the scatter.txt file.
3.Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
4.Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
5. Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
6.After the red progress bar is complete, there will appear a purple progress bar.Right after the purple progress bar is complete, a message will appear underneath it:
7.“Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
8.When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
9.You can now safely disconnect your phone and turn it on. The process ends here.
Warning:Make sure your battery is fully charged atleast 70% above before proceed to perform this method.
Prerequisites:
Lenovo A5000 Firmware
SP_Flash_Tool_exe_windows_v5
Mediatek USB VCOM drivers
PC
USB Cable
Procedure:
1.Download and extract the SP Flash Tool and Mediatek USB VCOM drivers.Install the driver if not already installed
2.Download and extract your ROM package and find the scatter.txt file.
3.Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
4.Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
5. Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
6.After the red progress bar is complete, there will appear a purple progress bar.Right after the purple progress bar is complete, a message will appear underneath it:
7.“Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
8.When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
9.You can now safely disconnect your phone and turn it on. The process ends here.
Comments
Post a Comment