Below is the instructions you should follow to flash your Samsung J1 SM-J110H using ODIN.Do the flashing of new firmware if you have encounter software glitches in your phone.First thing first download the your firmware here>http://www.sammobile.com/ (you must have an account to download any firmware you want).
Download Odin here
Now,Put your phone in Download Mode
How To Flash Samsung J1 SM-J110H
Download Odin here
Now,Put your phone in Download Mode
- Turn off the device
- Press and hold Volume Down key + Home Key, while pressing these keys then press and hold Power key for a while
- Release all key when you see ODIN Mode / Download Mode
- When connected successfully, you will get a message in Odin saying Added!!. (In case you don’t get it, try another USB port. If that doesn’t help either, then re-install USB drivers).
Connect your phone to PC using USB Cable Mini
In Odin make sure that the Auto Reboot and F. Reset Time check boxes are the only options checked and nothing else is.
Click on PDA on Odin, locate the .tar.md5 file and hit the Start button to initiate the update process.
When official update installation is successfully completed, on Odin ID:COM will turn green and Odin will show you a PASS message.
First boot takes a bit of while to load things up – so be patient!
Note: In case your device gets stuck at boot screen after installation of official firmware.Do te Hard Reset!
Hard Reset of Samsung J1 SM-J110H
Turn off the device
Press and hold Volume UP key + Home Key, while pressing these keys then press and hold Power key for a while
Release all key when Android or Samsung logo appear then you will see Android System Recovery
Use Volume keys to select Menu
Use Power key to Confirm
Comments
Post a Comment